Operating Manual SIGMA 4-15C, page 3 of 95
03/06
Dear customer,
Congratulations for purchasing a SIGMA laboratory centrifuge. You have selected a device
which combines many advantages.
A wide spectrum of programming options and an electronic operation control allow a trouble-
free use of the centrifuge. With its 3-phase drive, maintenance-free, quiet operation without
any carbon dust pollution is guaranteed.
Your device is equipped with user-friendly options which make the operation and standard
settings easier for you. Built-in error-detecting functions keep the user from entering incorrect
values and check the complete operation.
A special advantage is the storage capacity the centrifuge offers. The instrument has a
program memory which can store up to 50 data sets and is capable of keeping the last run
program in its memory for an unlimited amount of time allowing the program to be restarted
at any time - even if the centrifuge was turned off in between. All important operation
parameters can be seen at a glance.
The settings are executed via the knob in the control panel which has a coated surface
protecting the device against moisture and dust. In addition, the interior of the centrifuge is
also easy to clean. We are able to offer you a device that combines functional variety with
practical applications.
We thank you for your confidence and wish you a successful application of the centrifuge.
SIGMA Laborzentrifugen GmbH
P.O. Box 1713 - 37507 Osterode/Germany
Phone 05522/5007-0 - Fax 05522/500712
Internet: www.sigma-zentrifugen.de
eMail: info@sigma-zentrifugen.de
SIGMA Service-Tel. 05522/5007-25
To Next Page
Loading...
