Sigma FP - Page 119

119
VOLUME ADJUSTMENT
To display the volume setting guide, press the button
while a movie is being displayed. Use the to adjust the
volume, and use the button to apply the setting.
CUTTING OUT A PHOTO FROM A MOVIE
You can create a photo of the desired frame from a movie file.
1
Play back a movie, and temporarily stop it in the target frame.
 If you failed to stop in the desired frame, use the button or the
Front/Rear dial in Pause mode to perform frame-by-frame playback.
2
Press the button to select [Save As DNG] or [Save As JPEG].
 [Save As DNG] is only available when [Format] is set to [CinemaDNG].
3
Select [Yes], and press the button to apply the setting.
 The file size varies depending on the setting of [Resolution] of the movie
file.
UHD
3840 x 2160
FHD
1920 x 1080
 [Image Quality] of a file saved with [Saved as JPEG] is set to [FINE].
 [DNG Quality] of a file saved with [Saved as DNG] varies depending on
the setting of [Bit Depth] of a movie file.
 The file number of the created file is assigned to the next number of the
last still file in the media, and saved in a sub folder under the DCIM folder.