81
DIRECTOR'S VIEWFINDER
(CINE)
This function simulates how an angle of
view is changed depending on the setting
information of the registered cinema
camera and the focal length of the
attached lens.
The pre-setting for using an anamorphic
lens is also registered in this viewfinder.
You can desqueeze a video squeezed
with an anamorphic lens to display it.
A movie is recorded based on the setting described in [Record Settings]
(P.74) of the Set-up menu.
CAUTION
This setting is not available in STILL-like style.
No sound is recorded.
The focus frame is fixed to the center of [Single] and the M size.
The time code, frame guide, and grid line are not displayed.
The Image Magnification function is not available.
To set this function, select [ SHOOT]
→
[Director's Viewfinder]
→
[On].
1
Specify [Brand], [Model], and [Settings] as simulation conditions.
2
Set [Surround View].
The long side of a frame is fitted to the screen.
Black
The area outside the frame range is masked in black
without fitting to the screen.
Semi-
The area outside the frame range becomes
semi-transparent without fitting to the screen, so you
can check the area outside the frame range.
After using this function, select [Director's Viewfinder] → [Off].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
