Sigma FP - SETTING THE LANGUAGE

24
SETTING THE LANGUAGE
The default language displayed on the LCD monitor is English. The
language can be changed using [Language / 言語] in the Set-up menu.
For when the camera used for the first time
When the camera is switched on for the first time, select a language on the
display. Press
buttons and confirm the language by pressing the
button.
After selecting a language, input th
e date and time on the display. For the
details of settings, refer to the instructions in “
SETTING THE TIME AND
DATE” on the page 25 of the instruction manual, from the section number 5
onward.
1
Turn the camera on.
2
Press the button on the back of
the camera to display the Camera Set-up
Menu. (See P.29)
3
Select [ SYSTEM
(
5
)
] by rotating the
Front Dial.
4
Use the buttons to select [Language/
言語].
5
Press the or button to open the
language set-up page.
6
Use the buttons to select the desired
language.
7
Press the button to apply the setting or
the button to return to the language
set-up page without making any changes.