54
FOCUS FRAME SETTING
You can change the focus frame size or position as well as the operation
method.
Press the
button, and select the desired option using the Front/Rear dial
or the
buttons.
You can also select [ / SHOOT] → [Focus] → [Focus Area] to set the
target.
After the setting is completed, press the
button or half-press the shutter
button to apply the setting.
Multi Auto Focus Points (Default)
MULTI AUTO FOCUS POINTS
Uses up to 49 focus frames for focusing. This function is available when the
subject is in the center.
The range of the distance measurement
area can be changed by pressing the AEL
button and turning the Front/Rear dial (the
size of the multi-point distance measurement
area frame is changed).
When the range of the distance
measurement area is narrowed, you can
use the
buttons to move the position
of the multi-point distance measurement
area frame.
You can also perform a touch operation (tap or drag) to move the position
of the multi-point distance measurement area frame.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
