Sigma FP - CINEMAGRAPH

128
CINEMAGRAPH
You can create a GIF animation in which only a part of a file is moving, from
a movie file.
CINEMAGRAPH EDIT SCREEN
1
Selecting Start Frame
2
Selecting End Frame
3
Selecting Still Image Frame
4
Masking Area
5
Playing Speed
6
Bounce
7
Exposure Compensation
8
Color Mode
9
Save as GIF File
10
Selected item
1
Select [ PL AY ] → [Cinemagraph] → [New].
2
Select a movie you want to create as a cinemagraph, and press the
button. Message "Now Processing..." is displayed, and the display changes
to the cinemagraph edit screen.
3
Specify the starting frame. (Use the
button to select , and press the button.
Follow the movie playback procedure to
temporarily stop the movie in the target
frame, and press the button.)
1. Time Code
2. Period of cut-out range
4
Specify the ending frame. (Use the button to select , and press
the button. In the same way, temporarily stop the movie to end in the
target frame, and press the button.)
 The movie cut-out period is five seconds or less. If you set the ending
frame to a frame that is placed five seconds after the starting frame, the
starting frame is automatically shifted and adjusted so that the
five-second period is ensured.