127
3
While checking the image, use Front or Rear Dial or
buttons to change
the adjustment value (or option). Then, press the
to accept your change.
4
Repeat Step
2
and
3
in case there are multiple items to change.
5
After finalizing the setting, select
(the Process RAW Development icon)
and press the
button.
6
Select [Yes] with the
buttons and press the
button to apply the
setting.
To cancel, select [No] and press the
button.
At the time of playback, the
mark is displayed for the
JPEG file created from DNG data.
The File Number of the JPEG image developed from RAW data will
become the next number following the final recorded file in the memory
card.
CAUTION
If there is insufficient space on the card, a warning message is displayed,
and DNG development cannot be performed.
It is recommended that SIGMA Photo Pro is used for further detailed
adjustment.
To Next Page
Loading...
