142
PIXEL REFRESH
If a bright point is recorded in an image, use pixel refresh.
This optimizes shooting elements and image processing.
Close the cap, select [Yes], and press the
button to apply the setting.
LCD SETTINGS
You can adjust the brightness and hue of the LCD monitor.
Brightness (LCD Brightness)
Press the
button to adjust to the brightness to the appropriate value,
and press the
button to apply the setting.
When
is selected, the monitor is automatically adjusted to an
appropriate brightness according to the exposure data.
Hue (LCD Hue)
Adjust [Red] and [Blue] values while looking at the chart at the bottom of
the screen.
Normally set it to ±0.
POWER SAVE
LCD Off
The backlight of the LCD monitor is automatically turned off if no operations
take place for a certain period of time. Because power is turned on, all
buttons are operable. Half-pressing the shutter button starts shooting.
Auto Power Off
The camera is automatically turned off when no operations are performed
while the LCD is inactive. During Auto Power Off, buttons do not work.
Half-pressing the shutter button releases the auto power-off mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
