47
S SHUTTER SPEED PRIORITY AE
Set the desired shutter speed. The camera automatically determines the
aperture value based on the brightness of the subject.
Set the desired shutter speed by rotating the Front Dial.
CAUTION
If the subject is too bright or dark, the aperture value indicator flashes.
Adjust the shutter speed until it stops flashing.
In CINE mode (CINE style)
To set the shutter angle (speed), open the Quick Set menu or select
[ SHOOT] → [Exposure Settings].
To switch to P Mode, in the Quick Set menu, press the button while
selecting the shutter angle, and in the [ SHOOT] menu, set the shutter
angle (speed) to [Auto].
M MANUAL EXPOSURE
Set both the shutter speed (angle) and aperture value.
Set the aperture value using the Front Dial. Then, set the shutter angle
(speed) using the Rear Dial so that the numeric value of the exposure
meter is set to "0.0".
The exposure meter can display an exposure error of up to ± 5 stops from
the correct exposure in 1/ 3 steps. If the exposure error is more than
three stops, the exposure meter will flash.
When the ISO Sensitivity (P.68) is set to [ISO Auto]:
Images are taken using Auto Exposure in which the camera automatically
sets the ISO sensitivity according to the brightness of the subject.
CAUTION
If the subject is too bright or too dark, the ISO indicator flashes. Adjust the
shutter speed (angle) or aperture until the indicator stops flashing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
