49
LCD DISPLAY MONITOR IN M MODE
(STILL)
When the exposure mode is set to M, the actual exposure is applied to the
screen. If it is difficult to confirm the focus or composition, you can switch
the screen brightness to the desired mode.
[ SHOOT] → [Preview Exposure in M Mode]
Off
Brightness of the LCD Display is automatically
adjusted for better visibility.
On (Default)
The selected exposure value is reflected in the LCD
Display.
When ELECTRONIC FLASH EF-630 (FOR SIGMA) is used with the
camera, the brightness of the LCD Display is automatically adjusted for
better visibility even when the function is [On].
BRIGHTNESS LEVEL MONITOR
(CINE/STILL)
The brightness level can be selected from two types of brightness level
views as a means to judge the exposure when shooting.
[ / SHOOT] → [Brightness Level Monitor]
For details on the histogram, refer to page 116.
Waveform
The horizontal axis indicates the horizontal position
of the screen, and the vertical axis indicates the
brightness level (bottom: 0, top: 255). Unlike the
histogram, you can easily grasp the status of the
brightness value at a given location.
Whether to display the brightness level monitor can be selected from
[Brightness Level Monitor] in Display Mode Settings (P.138).
In CINE mode (CINE style), both the histogram and waveform can be
selected from two sizes (Standard and Wide).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
