Sigma FP - Page 67

67
You can also select [ / SHOOT] → [Lens Function Settings] → [Lens
Optical Stabilization] to set this function.
ELECTRONIC STABILIZATION
(CINE/STILL)
For still image shooting, this function combines multiple images and
generates an image with reduced camera shake.
For movie shooting, this function generates a video with reduced camera
shake while combining multiple frames before and after the target.
CAUTION
 [Electronic Stabilization] cannot be simultaneously used with [Lens
Optical Stabilization].
 In STILL mode, an image is recorded at a narrow angle of view of
approximately 5%.
 The range of shutter speeds able to be selected (shutter’s working range)
is limited from 1/4000 sec to 1/4 sec.
 The range of ISO sensitivity able to be selected is limited from ISO 100 to
6400.
 The following functions or settings cannot be used in combination.
Drive Mode: Continuous, Interval Timer, Bracketing, HDR, Fill Light,
ISO sensitivity settings added with the [Composite Low ISO Expansion],
Flash photography, Image Quality: DNG, DNG+JPEG,
Format: CinemaDNG
 In CINE mode, the [MOV] setting is limited as shown below.
119.88
fps
100
fps
59.94
fps
50
fps
29.97
fps
25
fps
23.98
fps
× × 〇 〇 〇 〇 〇
〇: Available ×: Unavailable