96
2
Press the AEL button to open the preview screen (still screen).
3
Use the
buttons to select [Red] or [Blue], and use the
or
button to
apply the setting.
4
Use the
button to set the adjustment value (up to ±1.0 in 0.2-step
increments), and use the
button to apply the setting.
TIP
The adjustment value is stored in the camera, and called if the adjusted
lens is attached.
When you are using a lens other than the L-mount lens:
You can compensate for the color shading of the lens that is attached by
using a mount adapter manufactured by another company.
1
Select
[ / SHOOT]
→
[Lens
Optics
Compensation]
→
[Color
Shading],
select the desired column from [#1 to #10], and press the
button.
2
On the Compensation Capture screen, fill a monotonous screen without a
color tone such as white or gray on the entire screen, and press the AEL
button.
3
When compensation succeeds, the Compensation screen is displayed. If
fine adjustment is required, press the
button, and make fine adjustment
following step 3 and subsequent steps in the previous item.
ENTERING LENS INFORMATION
4
When compensation is completed, press the
button to move to the lens
information entry screen.
5
Enter information on the [Focal Length / Aperture Input] screen. When
entering other information, open the [Note] screen. For details about how to
enter a memo, refer to "ENTERING INFORMATION" of [COPYRIGHT
INFORMATION] ( P. 136).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
