99
When the exposure mode is set to M, only the shutter speed will be
changed. (When [ISO Auto] is selected, ISO varies.
Exposure BKT can be combined with exposure compensation.
Bracketing is performed based on the compensation value specified in
Exposure Compensation.
You can check the shooting frame using the bar indicator of the icon.
Example: When five frames are taken
FOCUS BKT
This function allows you to continuously take photographs with the focus
position bracketed based on the focus position.
The
number
of
pictures
to
be
taken (3,
5,
7,
9,
11,
13,
or
15)
Up to ±10 levels in one-step increments
Bracketing
Order
Focal point
→
Front focus
→
Rear focus
0
+
Focal point
→
Rear focus
Focal point
→
Front focus
The focus shift per step varies depending on the lens.
4
Use the
buttons to select a desired value, and press the
button or the
button to apply the setting.
5
Half-press the shutter button to return to the shooting mode.
(The setting icon and bracketing amount are displayed.)
The operations in each Drive Mode are shown below.
Single Capture
After focusing, hold down the shutter button;
continuous shooting starts.
Self Timer
After focusing, hold down the shutter button; the timer
is activated. When the specified timer period expires,
continuous shooting starts.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
