ROX 5.0
4 Basic settings
Press and hold the
Set
button for three seconds. ‘Setting OPEN’ flashes on the
display. The preset language then appears.
If you are using the ROX 5.0 for the first time and awakening it from deep sleep
mode, it will automatically jump to setting mode without you pressing and holding
the
Set
button.
Caution
The ROX 5.0 can also be set during a ride. Not advised and please do so with
caution!
4.1 Setting the language
1 Press the
Mode 1
button to switch to the preset language.
2 Press the
Set
button. The display flashes.
3 Press
Mode 2
or
Reset
to select the desired language.
4 Press the
Set
button to save your setting.
‘Set OK’ appears on the display.
4.2 Setting the unit of measure
1 Press the
Mode 1
button to switch to the preset unit.
2 Press the
Set
button. The display flashes.
3 Press
Mode 2
or
Reset
to switch between km/h and mph.
4 Press the
Set
button to save your setting.
‘Set OK’ appears on the display.
4.3 Setting the wheel size 1 and 2
1 Press the
Mode 1
button to switch to the preset wheel size
1 or wheel size 2.
2 Press the
Set
button. The first two digits for entry flash.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the
Set
button to save your setting.
‘Set OK’ appears on the display.
Set Mode 1
Mode 2
Reset
Set
Mode 1
Mode 2
Reset
Set
Mode 1
Mode 2
Reset
Set
Mode 1
Mode 2
Reset
To Next Page
Loading...
Need help?
General
