Sigma ROX 5.0 User Manual

Page 21
Setting the intensity zones 1, 2, 3, and 4
Basic settings
ROX 5.0
www.sigmasport.com
ROX 5.0
4.11 Setting the intensity zones 1, 2, 3, and 4
The ROX 5.0 has four intensity zones, which make it easier to control your long
term training. The values are automatically calculated based on your maximum
heart rate. You can also customize the values for the individual intensity zones.
1 Press the
Mode 1
button to switch to the preset intensity zone 1, 2, 3, or 4.
2 Press the
Set
button. The lower zone limit flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the upper zone limit.
5 Press the
Mode 2
or
Reset
button to increase or decrease the value
respectively and the
Set
button to save your entry.
‘Set OK’ appears on the display.
Note
During a ride, you can view the intensity zone function with a % distribution for
your current training session.
4.11.1 Displaying the intensity zones in normal mode
You can also obtain a graphical image of the area in which you are currently
training:
1 In normal mode, press
Mode 2
to switch to the intensity zones screen.
2 The four intensity zones are graphically displayed in the bottom display
segment.
3 An arrow shows you which zone you are currently training in.
Set Mode 1
Mode 2
Reset

Sigma ROX 5.0 Specifications

General

Brand	Sigma
Model	ROX 5.0
Category	Bicycle Accessories
Language	English