ROX 5.0
5.7 Resetting trip data
1 Press and hold the
Reset
button for more than three seconds.
2 ‘Tour data RESET’ flashes on the display.
Use this function to reset the following values to zero:
Trip distance, ride time, avg. speed, max. speed, avg. cadence, lap distance, lap
time, intensity zones, avg. heart rate, max. heart rate, calories.
5.8 Total values for bike 1 and bike 2
If you use the ROX 5.0 on one bike, only the total values for the first bike will be
displayed.
If you also use a second bike, the total values are displayed under ‘bike 1’, ‘bike 2’
and ‘bike 1+2’.
5.9 Service interval
The service optional interval notifies you once a set distance has been ridden.
The service interval is an on screen reminder for regular bike maintenance. The
service interval can only be set with a Universal Fast Setting Box (UFSB) at your
local bike shop. Once the preset distance has been reached ‘Inspection’ appears
on the display.
Press any button to clear this message.
Note
The Service Interval default is OFF
5.10 Transport mode
If your bike is transported on a bike rack or in the car (if the ROX 5.0 is clicked
into the bracket), the integrated motion sensor switches the ROX 5.0 to
‘transport mode’. ‘Transport’ appears on the display. Press any button to exit this
mode.
5.11 PC interface / Downloadable
The ROX 5.0 is PC and Mac-compatible. After purchasing the optional
SIGMA DATA CENTER software and docking station, you can quickly and
effortlessly download your current ride data to your PC. The ROX 5.0 saves the
current values every 10 seconds for rides lasting up to 25 hours. The ride data
can be graphically displayed in the Data Center.
Note
The SIGMA DATA CENTER software and docking station can be ordered from the
SIGMA SHOP at www.sigma-data-center.com.
Reset
To Next Page
Loading...
