Sigma ROX 5.0 User Manual

Changing the batteries
Technical data
Page 36
ROX 5.0
www.sigmasport.com
ROX 5.0
8.2 Changing the batteries
Low battery warnings for the bike computer and transmitters (speed, cadence,
and/or chest belt) appear on the display. After changing the battery, only the
clock needs to be reset.
Bike computer
5.1
− Use the tool provided to open the rear battery compartment.
− Remove the old battery, wait 1 minute.
− Insert the new battery.
− Note the polarity!
− If the sealing ring is loose, reposition it.
− Use the tool provided to close the compartment.
Transmitter
5.2
5.3
5.4
− Use the tool provided to open the compartment.
− Remove the old battery.
− Insert the new battery.
− Note the polarity!
− If the sealing ring is loose, reposition it.
− Use the tool provided to close the compartment.
8.3 Temperature, batteries
Bike computer
Ambient temperature +60°C/-10°C
Battery type CR 2450 (ref. no. 20316)
Speed transmitter
Ambient temperature +60°C/-10°C
Battery type CR 2032 (ref. no. 00342)
Cadence transmitter
Ambient temperature +60°C/-10°C
Battery type CR 2032 (ref. no. 00342)
Heart rate transmitter
Ambient temperature +60°C/-10°C
Battery type CR 2032 (ref. no. 00342)

Sigma ROX 5.0 Specifications

General

Brand	Sigma
Model	ROX 5.0
Category	Bicycle Accessories
Language	English