12 BEFORE INSTALLATION
• In addition to the quantity required for installing
the appliance, spare screws may be provided.
Other
• Stepladder
• Dolly, hand truck
• Hammer drill for drilling holes in wall or floor
• Drill bits in various sizes and suitable for
materials
•Wood screws in different sizes
• Thin plywood sheet, particle board or cardboard
to protect the floor from damage
• Suitable material for covering and protecting
furniture (protective sheets)
• Adhesive tape
Tools
-2
Air guide
18 x
114 x
13T
2
23 x
107 x
13T
2
-1Door stop pin
20T
30T
1
1
Torx bit
-1
Wrench (for
door panels
and leveling)
Cordless screwdriver
Torx bit T20, T30 and
magnetic holder
Torx screwdriver T20, T30
3/8" (10 mm) hex nut driver
Item Size Quantity Used for
Various drill bits
Multigrip pliers
Adjustable wrench
Cutter with adustable blade
Metal tape measure, folding
rule
Square
Level, length 2" (60 cm) and 4'
(1.2 m)
Saw to cut top trim pieces (for
retrofit installation only)
en-us_main.book.book Page 12 Monday, January 16, 2023 5:19 PM
To Next Page
Loading...
