23INSTALLATION
ENGLISH
Attaching Appliance to Enclosure
• To avoid tip overs, the appliance must be attached to the top of the enclosure and the anti-tip brackets
must be engaged.
• The top of the enclosure must be made of a solid material (not MDF) that is at least 5/8" (16 mm) thick.
1 Screw the lugs on the safety bracket at the top of the appliance to the top of the enclosure.
a 4X15 (4 ea)
2 If there is a large gap between the top of the appliance and the top of the enclosure, insert a piece of
wood between the lugs and the top of the enclosure to fill the gap.
3 Screw the side safety brackets to the sides of the enclosure.
a 4X15 (4 ea)
• If installing two appliances side-by-side, attach the appliances to each other using the unification kit.
Attach them to the sides of the enclosure as if they were one unit.
en-us_main.book.book Page 23 Monday, January 16, 2023 5:19 PM
To Next Page
Loading...
