24 INSTALLATION
4 Slide the top piece from the front filler assembly a in at the top of the appliance until it engages with
the top safety bracket.
5 Once the top piece of the filler assembly is in place, slide the base of the filler assembly in under it and
snap the top into the base b.
• If installing two appliances side-by-side, attach both top covers using the bolt found in the accessories
package.
a 1 5/8" (41.5 mm)
en-us_main.book.book Page 24 Monday, January 16, 2023 5:19 PM
To Next Page
Loading...
