Signature SKSFD4826P - Advanced Operation Features; Ice Maker Functions; Settings and Modes

11BEFORE INSTALLATION
ENGLISH
NOTE
• The left and right French door panel holes are symmetrical.
• The freezer drawer panel holes are symmetrical.
• The freezer drawer panels have the same intallation dimensions.
Optional Accessories for Flush or
Proud Installation
SKSPK480FS – STAINLESS STEEL PANEL KIT
This unit can be installed with an optional stainless
steel panel kit. The kit includes two refrigerator
door panels, one convertible drawer panel, three
freezer drawer panels, one toe kick, and four
handles.
SKSFK800CS – FRAME KIT
This unit can be installed in a 24" (610 mm) deep
cutout with an optional frame kit. The kit includes
two 80" (2032 mm) brushed aluminum side trim
pieces. Each trim piece is 5" (127 mm) deep with a
1/8" (3 mm) front face.
SKSHK310HS – REFRIGERATOR DOOR
HANDLES FOR USE WITH CUSTOM PANELS
31 11/16" (805 mm) medium brushed aluminum
handle
SKSHK230HS - FREEZER DRAWER HANDLES
FOR USE WITH CUSTOM PANELS
22 3/4" (578mm) medium brushed aluminum
handle
NOTE
• The stainless steel panel kit may be used in a
flush 25" (635 mm) cutout depth installation or in
a proud 24" (610 mm) cutout depth installation.
• The optional frame kit is recommended for
retrofit/replacement installations where the
existing cutout is 24" (610 mm) deep.
Required Accessories and
Tools
Accessories
Supplied Accessories
• Installation instructions
• Operating instructions
• Water filter (included with refrigerator)
• Installation kit
F 2 1/32" (51.2 mm)
G 3 5/8"(92.1 mm)
- Dimensions
Item Size Quantity Used for
-2
Anti-tip bracket
5H x
45L
6
5 x 30L 6
4D x
15L
4Top bracket
-1Gauge tool
4D x
14L
120
Door panel
-30
4D x
14L
8Side bracket
en-us_main.book.book Page 11 Monday, January 16, 2023 5:19 PM