Signature SKSFD4826P Installation Manual

35SPECIAL INSTALLATIONS
ENGLISH
(Optional) After adjusting the door spring, attach the gray plastic sheets to hide the adjusting screws.
Adjusting the Door Stop
The default door stop position is 115°. Follow these instructions to change the door stop position to 90°.
1 Open the door to 90°.
2 Insert the door stop pin in the holes which are now aligned at the back of the hinge. Use a rubber
mallet to fully insert the pin.
en-us_main.book.book Page 35 Monday, January 16, 2023 5:19 PM

Signature SKSFD4826P Specifications

General

Brand	Signature
Model	SKSFD4826P
Category	Refrigerator
Language	English