22 INSTALLATION
2 Turn the nut clockwise, as shown above, to raise the appliance. Turn the nut counterclockwise to
lower the appliance.
3 Make sure the weight of the refrigerator is carried on the legs, not the wheels.
4 Use a smartphone leveling app or place a carpenter's level on the top and sides of the appliance to
check that it is level and plumb. Or use the provided gauge tool to measure the distance of the bottom
edge of the appliance from the floor at the front corners.
• To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with the
floor.
• If using a power drill, use the lowest torque setting.
• The maximum height adjustment is 11/16" (17 mm).
en-us_main.book.book Page 22 Monday, January 16, 2023 5:19 PM
To Next Page
Loading...
