EasyManua.ls Logo

SIGNIFY EA2476 - Page 16

SIGNIFY EA2476
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AFTER SALES SUPPORT
1300 7 77 137
service@unclebills.com.au
MODEL: EA2476 PRODUCT CODE: 715222 03/2024
16
GETTING STARTED (CONT.)
WARNING: Use only Alkaline (AA/LR6) batteries with the Wildlife Camera, other
primary battery types such as Carbon Zinc should not be used.
NOTE: The Wildlife Camera does not support the charging of external batteries.
NOTE: We recommend using 4 x Alkaline (AA/LR6) batteries (1.5V each) for the
Wildlife Camera. The Wildlife Camera is 5V.
NOTE: Do not use new and old batteries together.
NOTE: The Wildlife Camera will automatically switch to AA Alkaline battery power
once the built-in battery available power drops to 10%.
NOTE: If the AA Alkaline battery available power is less than 30% and the bulit-in
battery available power is less than 10%, the Wildlife Camera will stop or reduce
night shooting. It is recommended to regularly check the Alkaline battery usage
(in SETUP mode) to ensure there is enough AA Alkaline battery power to support
operation in the situation where the built-in battery power is too low.
WARNING: Danger of explosion if the batteries are replaced incorrectly or with the
incorrect type. Replace only with 4 x Alkaline (AA/LR6) batteries (1.5V each).
WARNING: Do not expose batteries to excessive heat, direct sunlight, open flames,
or any other heat sources.
IMPORTANT: Dispose of all used batteries at designated disposal points. Never
dispose of batteries in a fire as this may cause an explosion or leakage of
dangerous chemicals and fumes.
NOTE: To check the inserted Alkaline batteries power, in SETUP mode, press the
button. You can also check the Alkaline battery power in the ‘Menu Options and
Settings’ section starting from page 21 of the instruction manual.

Related product manuals