AP10
English
AP10 · Date 10.01.2020 · Art. No. 86832 · Mod. status 6/20
23
Table of contents
1 Documentation . . . . . . . . . . . . . . . . . . . 24
2 Safety information . . . . . . . . . . . . . . . . . . 24
2.1 Intended use . . . . . . . . . . . . . . . . . . . 24
2.2 Identification of dangers and notes . . . . . . . . . . 24
2.3 Target group . . . . . . . . . . . . . . . . . . . 25
2.4 Basic safety information . . . . . . . . . . . . . . 25
3 Identification . . . . . . . . . . . . . . . . . . . . 26
4 Installation . . . . . . . . . . . . . . . . . . . . . 26
4.1 Mechanical mounting . . . . . . . . . . . . . . . 27
4.2 Electrical Installation . . . . . . . . . . . . . . . 28
4.3 Connection concept (RS485, CANopen) . . . . . . . . 29
4.4 Connection concept (IO-Link) . . . . . . . . . . . . 32
5 Commissioning . . . . . . . . . . . . . . . . . . . 33
5.1 Calibration . . . . . . . . . . . . . . . . . . . . 36
6 Battery change . . . . . . . . . . . . . . . . . . . 36
6.1 Battery, function and service life . . . . . . . . . . . 37
6.2 Operating states . . . . . . . . . . . . . . . . . 37
6.3 Changing the battery unit . . . . . . . . . . . . . 37
6.4 Faults after battery change . . . . . . . . . . . . . 38
7 Transport, Storage, Maintenance and Disposal . . . . . . 38
8 Accessory connector . . . . . . . . . . . . . . . . . 39
8.1 Mating connector M8 straight inclusive cable . . . . . . 39
8.2 Straight matting connector M8 . . . . . . . . . . . 39
8.3 Mating connector M8 bus terminator (RS485, CANopen) . 40
9 Technical data . . . . . . . . . . . . . . . . . . . . 40
To Next Page
Loading...
Need help?
General
