Silicon Graphics Octane III User Manual

22 007-5633-001
3: System I/O Interfaces Overview
USB Type A Connector
Figure 3-2 shows the pinouts for the USB type A connector that is used for USB ports 0 through
3 on the rear panel of the Octane III system.
The USB ports are used for connecting keboard, mouse and other USB compatible devices to your
system.
Figure 3-2 Pin Number Locations for USB Type A Connector
Table 3-1 lists the pin assignments for each connector on the USB interface.
Table 3-1 Pin Assignments for USB Type A Connectors
Signal Color Pin Number
VCC Red 1
-Data White 2
+Data Green 3
Ground Black 4
1234

Silicon Graphics Octane III Specifications

General

Brand	Silicon Graphics
Model	Octane III
Category	Server
Language	English