How To Change the Configuration Data
007-5633-001 37
SouthBridge Configuration
This feature allows the user to configure the settings for the Intel ICH South Bridge chipset.
USB Functions
This feature allows the user to decide the number of on-board USB ports to be enabled. The
Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 Ports, 10 Ports and 12 USB ports.
Legacy USB Support
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB support will
be automatically enabled if a legacy USB device is installed on the motherboard, and vise versa.
The settings are Disabled, and Enabled.
USB 2.0 Controller
Select Enabled to activate the on-board USB 2.0 controller. The options are Enabled and Disabled.
USB 2.0 Controller Mode
This setting allows you to select the USB 2.0 Controller mode. The options are Hi-Speed (480
Mbps) and Full Speed (12 Mbps).
BIOS EHCI Hand-Off
Select Enabled to enable BIOS Enhanced Host Controller Interface support to provide a
workaround solution for an operating system that does not have EHCI Hand-Off support. When
enabled, the EHCI Interface will be changed from the BIOS-controlled to the OS-controlled. The
options are Disabled and Enabled.
XIDE/SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE
devices and displays the following items:
• SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while selecting Enhanced
sets SATA#1 to native SATA mode. The options are Disabled, Compatible and Enhanced.
• Configure SATA#1 as
To Next Page
Loading...
Need help?
General
