38
GB
7.4 Power supply
DANGER! Risk of injury!
~ Do not insert the mains plug10 into a
wall socket until the food processor has
been completely assembled for the intend-
ed purpose.
Insert the mains plug10 into a wall socket
that corresponds to the technical data on the
rating plate. The wall socket must still be eas-
ily accessible after connection.
7.5 Switching on and off
and adjusting the
speed
Use the dial11 to switch the device on and
off and select the speed setting:
NOTE: when selecting the speed setting,
consult the recommendation in the tables.
8. Using the blade
assembly
DANGER! Risk of injury!
~ The blades of the blade assembly5 are
very sharp. Do not touch them. Attach
the blade guard6 when you are not us-
ing the blade assembly5.
• Removing the blade guard:
Pull the blade guard6 in the middle
slightly away from the blade assem-
bly5 and remove this by pulling up-
wards.
• Attaching the blade guard:
Place the blade assembly5 into the
blade guard6 from the top. Make sure
that both blades are completely protect-
ed.
Application area:
The blade assembly5 is suitable for chop-
ping onions, herbs, vegetables, fruit, parme-
san and meat.
Switch
position
Function
P
Pulse function:
- Hold the dial11 in the P
position to switch on the de-
vice.
- Release the dial11
to
switch off the device.
- Enables working with several
brief pulses in a row – recom-
mended e.g. for herbs and
onions
0
turned off
1
Speed setting 1
(normal)
2
Speed setting 2 (high)
__355017_2004_Kuechenmaschine_B8.book Seite 38 Donnerstag, 24. September 2020 1:10 13
To Next Page
Loading...
Need help?
General
