48
GB
14. Trouble-shooting
If your device fails to function as required, please try this checklist first. Perhaps there is only
a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
~ Do not attempt to repair the device yourself under any circumstances.
Fault Possible causes / Action
No function
• Has the device been connected to the power sup-
ply?
• Check the connection.
• The food processor can only be started if certain
accessories have been assembled correctly (see
“Safety functions” on page 37).
The device vibrates strongly or
moves during operation.
• Please note the maximum quantities and the rec-
ommended preparation of the food.
• The suction feet must be clean and dry.
Blade assembly5 / mixer assem-
bly4 / whisking disc17 / blender
jug13: the working tool does not
turn only turns with great difficulty.
• Switch off immediately, remove the mains
plug10 and check the following:
- Has the maximum amount been exceeded?
- Is there an blockage (e.g. sinew, gristle) in the
container?
- Are the pieces of the ingredients too large?
The grater and cutting disc
16
stops
turning.
• Have you applied too much pressure?
• Is there a foreign object in the device?
Residual ingredients remain on top
of the grater and cutting disc
16.
• Not a fault, small residues remain for technical
reasons.
Grater and cutting disc
16
:
The ingredients are no longer being
correctly processed.
• Switch off, remove the mains plug10 and check
the following carefully:
- Have ingredients become trapped in the
blades? If so, please remove them.
- Is the working container8 filled to the maxi-
mum filling level? Empty it before you continue
working.
__355017_2004_Kuechenmaschine_B8.book Seite 48 Donnerstag, 24. September 2020 1:10 13
To Next Page
Loading...
Need help?
General
