43
GB
11.
Using the grater and
cutting disc
Application area:
The grater and cutting disc16 is suitable for
grating and cutting vegetables, fruit, pota-
toes and cheese. Both sides can be used.
On the one side for grating and on the other
side for cutting slices.
The tool you want to use must be on top:
WARNING! Risk of material dam-
age!
~ Do not exert too much pressure on the
grater and cutting disc16. Apply an
even pressure so that the motor does not
become blocked.
Processing table:
WARNING! Risk of material dam-
age!
~ Do not operate the device continuously
with the grater and cutting disc16 in
place for more than 5 minutes. After
this, the device must remain switched off
until it has cooled down to room temper-
ature.
Required accessories:
-Axle9
- Working container8
- Grater and cutting disc16
-Lid3 with food pusher1
NOTE: The adapter7 is not required for
mounting the grater and cutting disc16.
Work steps:
1. Figure B: place the axle9 on the base
unit12.
2. Figure C: position the working con-
tainer8 in position a on the base
unit12. Turn the working container
clockwise slightly until it audibly clicks
into position b.
3. Position the grater and cutting disc16
on the axle9 in such a way that the
Ingredi-
ents
max.
quantity
Processing
Carrots 300 g
Grating/Cutting: set-
ting
1
max. 5 min.
Leeks 300 g
Cutting: setting
1
max. 5 min.
__355017_2004_Kuechenmaschine_B8.book Seite 43 Donnerstag, 24. September 2020 1:10 13