English -15
− To prevent the device from falling, only install and operate
it and its components on a sturdy, level and vibration-free
surface.
− During the set-up process, maintain a minimum distance of 5 cm
around the device for sufficient ventilation.
− Ventilation must not be impeded by covering the device with
objects such as magazines, table cloths and curtains.
− Do not place the device near direct heat sources (e.g. radiators)
that could affect it.
NOTICE!
Possible material damage!
Improper handling of sensitive surfaces can damage the
device.
Avoid the use of chemical solutions and cleaning products
because these may damage the device surface and/or the labels
on it.
NOTICE!
Possible material damage!
Using USB extension cables can lead to malfunctions or
damage.
Do not use a USB extension cable.
3.3. Malfunctions
If the device is malfunctioning, this may be due to electrostatic
discharge.
In this case, unplug the mains adapter and wait a few seconds
before inserting the mains adapter back into the socket.
It may be necessary to reset to the factory settings (for more
information, see chapter 26.6. of the complete user manual).
IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 15IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 15 08.12.2021 13:10:0008.12.2021 13:10:00
To Next Page
Loading...
