EasyManua.ls Logo

Silvercrest SIRD 14 E1 - Configuration for the Internet Radio; Network Requirements; Network Configuration

Silvercrest SIRD 14 E1
285 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English -23
Press the MODE button on the device or on the remote control to select an
operating mode (INTERNET RADIO, PODCASTS, SPOTIFY, AMAZON
MUSIC, DEEZER, MUSIC PLAYER, DAB, FM, BLUETOOTH AUDIO or AUX
IN). Press OK on the dial or SELECT on the remote control to confirm your selection.
Press the MENU button or
on the remote control to call up the main menu for the
corresponding mode.
Press the MENU or button to return to a previous menu level.
9. Confi guration for the internet radio
The radio is registered with the Airable service when it is connected to the internet (see also
www.airablenow.com).
You can connect the radio to the internet via an access point to your PC:
Wirelessly in WLAN mode: The radio’s WiFi antenna receives the signal from your DSL
router.
The PC does not need to be switched on to receive radio stations.
The station list on your internet radio is provided and continually updated free
of charge by www.airablenow.com.
If a radio station is unavailable, this can be for various reasons on the part
of the radio station operator. However, this does not mean that the device is
faulty.
When connecting to internet radio stations, high numbers of requests may
lead to temporary delays. Try to establish a connection with the internet ser-
vice again later.
9.1. Network requirements
The network must feature the following properties for the device to work as a WLAN radio:
The router used for the network must have a DHCP server function so it can
automatically assign the device a network IP address.
If you already use a router configured in this way, you can connect the WLAN radio
straight to the network.
10. Network confi guration
The WLAN (wireless) network configuration is possible for the internet radio.
If you are on a wireless 802.11 a/b/g/n network, you can connect the internet radio
to the internet via WLAN.
When using the device for the first time, you must select an access point (AP) and
enter the network key, if applicable. The radio will then always connect to this AP
automatically. If the AP can no longer be found, a message appears accordingly.
IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 23IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 23 08.12.2021 13:11:5408.12.2021 13:11:54

Table of Contents

Related product manuals