24 - English
10.1. Accessing the web interface of the internet radio
The web interface is designed for displaying information, displaying the status
and for changing the device name.
When you enter the IP address of the internet radio in your browser, the web interface of
the internet radio is displayed.
• You can find the current IP address under SYSTEM SETTINGS/NETWORK/VIEW
SETTINGS.
• Here, you can change the name of your internet radio (factory setting is
[SIRD14E1]+space+[the last 6 digits of the MAC address]).
11. Connecting to a power supply
Connect the power supply plug on the supplied mains adapter to the DC IN socket on
the device.
Plug the mains adapter into an easily accessible power socket.
12. Using the device for the fi rst time
When using the device for the first time, the language selection dialogue is displayed first.
Select a language for the internet radio menu and press SELECT on the remote control
to confirm your selection.
The internet radio then starts with a message directing you to the website www.
frontiersmart.com/privacy on a PC or mobile device to read the privacy policy.
Press SELECT on the remote control to accept the data protection information.
After this, the set-up wizard starts.
Confirm the prompt SETUP WIZARD JETZT START NOW? by pressing YES to
start the set-up wizard.
The set-up wizard is displayed (in the previously set language):
If you select NO, you can select in the next window whether the wizard is to
start the next time the device is switched on.
12.1. Setting the time/date
Set whether to display the time in 12- or 24-hour format.
Configure whether the time is to be set automatically using the FM reception (UPDATE
FROM FM), automatically using the DAB reception (UPDATE FROM DAB),
automatically via the network (UPDATE FROM NETWORK) or not updated (NO
UPDATE).
IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 24IAN 359937 LB8-ML 5006 8137 QSG-Content final rev4 (V7).indb 24 08.12.2021 13:12:0308.12.2021 13:12:03
To Next Page
Loading...
