Connecting the receiver
24
Connection of an Audio-Digital Receiver
If you want to use 5-channel audio transmission (Dolby digital
sound/AC3), you must connect your audio-digital receiver to the
optical or coaxial output of the receiver.
Caution!
Never connect the Phono input of your stereo system to the
receiver; it may damage your stereo system.
Strictly follow the instructions for connecting the Cinch cable given
in the operating manual of your stereo system.
Caution!
Please follow strictly the information regarding connection in the
operating manual of your audio-digital receiver.
The optical and coaxial cables are not included in the
scope of supply.
Your TV set need not be switched on for radio reception.
To Next Page
Loading...
