Operation
31
Operation
Basic steps
Select a channel
Press the “CH+“ or “CH–“ key of the remote control or the “CH–“
and “CH+“ keys of the receiver to go to the previous or next
channel.
You can also go directly to a particular channel by entering
the channel location number of the desired channel using
the numerical keys.
Changing the channel may require up
to 5 seconds.
Volume
Press the “V+“ or “V–“ key of the remote control or the “VOL–“
and “VOL+“ keys of the receiver to increase or decrease volume.
Press the “MUTE“ key to mute the sound of the receiver.
Press the “MUTE“ key to switch it on again.
Selecting radio or TV mode
With the “TV/♫” key you can switch between the TV and radio
function.
Press the “TV/♫” key to use the receiver in the radio mode.
Press the “TV/♫” key again to use the receiver in the TV mode.
To Next Page
Loading...
