Entering basic settings
41
Manual search
With the manual scan, you can scan for a particular channel. You
can observe the scanning progress on the screen. As soon as the
channel scan is complete, a message appears telling you how many
channels have been found and how many of them are new channels.
The channels are saved in the general list.
Setting Options Description
Channel CH 5 to CH 69 You can set the channel to be scanned.
PCR-PID Identification number of a received data
stream
Audio PID Identification number of a received data
stream
Video PID Identification number of a received data
stream
Select “Manual search” with the “CH–“ and ”CH+“ keys.
Confirm your selection by pressing “OK”.
Select the channel with the “V–“ and ”V+“ keys.
By pressing the green function “PID search“ key, you can
use the number keys 0-9 to change the PIDs. The function
of the green function key is now known as ”TS search“.
You can now control the other PIDs which you wish to
change by using the “CH-“ and “CH+“ keys.
By pressing the green function “TS search“ key, the
adjusted PIDs can be accepted. The function of the green
function key is now known again as “PID search“.
This search method is only to be used by those who
understand what they are doing! Entering a false PID will
result in suboptimal tuning.
Press the “OK“ key or the red function key. The scanning process
starts. You may select and change the PIDs correspondingly by
pressing the green function key (only for experts!).
By pressing the yellow function key you can save the channels
found in your TV and radio channels list.
Exit the menu item by pressing the “EXIT“ key (several times).
To Next Page
Loading...
Need help?
General
