Entering basic settings
50
Enter the end time with the numerical keys.
The entry is accepted and appears in the input field.
Press the “OK“ key to select the repeat rate.
On the screen, a list containing the diverse repeat rates will be
displayed. You can choose from the following repeat rates.
Additional information: “Rep.“ means repeat.
Repeat “Rep.“ Explanation
Selection how often the timer will be executed.
1x record programme once
D record programme daily
1W record programme once a week
1-5 record programme daily from Monday to Friday
6-7 record programme daily from Saturday to Sunday
Select the desired repeat rate with the “CH–“ and ”CH+“ keys.
Select the corresponding input field to set the desired record type
(VCR = Video recording, reminder = message appears at the
programmed time).
Press the “OK” key.
Select the source.
Press the yellow functional key “F3" to save your entries.
Press the green multi-functional key "F2“ if you wish to abort the
input process.
In this case, your entries will not be saved.
If the “VCR“ recording type is active, we recommend that
the receiver is not used, as this may have an effect on the
video recording
Modifying entries
Select the main menu “Timer“.
Confirm by pressing the “OK” key.
To Next Page
Loading...
Need help?
General
