Safety instructions
9
• Always ask qualified personnel to carry out maintenance jobs.
Otherwise, you are putting yourself and others at risk.
• Spare parts to be ordered from the manufacturer.
• Modifications of the device lead to an extinction of the
manufacturer’s liability.
Suitable location
• Place the receiver on a stable and even base.
• Avoid proximity to:
- heat sources, like e. g. heaters,
- naked flames, like e. g. candles,
- devices with strong magnetic fields, like e. g. loudspeakers.
- Never place receptacles filled with liquid (e. g. vases) on the
receiver
• Avoid direct sunlight and places with an extremely high amount of
dust.
• Never cover ventilation slits. Ensure adequate ventilation of the
receiver.
• Do not place any heavy objects on the receiver.
• Humidity may settle in the receiver if it is brought into hot
surroundings from a cold one. In this case, wait for about an hour
before operating the equipment.
• Arrange the mains and antenna cable in such a manner that no-
one steps or trips over them.
To Next Page
Loading...
Need help?
General
