SSB 30 A1
English - 31
5. Safety instructions
Before you use this device for the first time, please read the following instructions and heed all warnings, even
if you are familiar with handling electronic devices. Before using it, inspect the device for any damage. A
damaged device must not be put into operation. Keep these operating instructions in a safe place for future
reference. If you sell the device or pass it on, it is essential that you also hand over these operating instructions.
The operating instructions are part of the product.
Explanation of symbols used
DANGER! This signal word indicates a danger with a high risk, which will lead to death or
major injuries if not avoided.
WARNING! This signal word indicates a danger with a moderate risk, which can lead to
death or major injuries if not avoided.
CAUTION! This signal word indicates important instructions to protect against damage to
property.
This symbol denotes further information on the topic.
Read the user manual!
Please only use the supplied power adapter (manufacturer: Dong Guan Reyi Power
Electronics Co., Ltd./ Type designation: RY36A180160EU) to power the product.
DC voltage
AC voltage
Power adapter plug polarity
A short-circuit protected, sealed safety transformer is built into the power adapter.
ta=40°C
This indicates the maximum ambient temperature at which the power adapter can be
operated.
Efficiency class VI
The power adapter is a switchable power adapter.
Use only in dry, indoor areas!
Safety Class II, protective insulation
To Next Page
Loading...
