■ 18 │ GB
│
IE
│
NI
│
CY
SSRA C2
♦ In the status bar at the bottom of the main
menu, you can see the current status of
the appliance, such as the cleaning mode,
charging or standby, the current cleaning
time, the battery status and the area already
cleaned in square metres.
♦ In cleaning mode Manual, you can control
the appliance manually using the arrow
buttons.
♦ Under Settings, you can locate the appli-
ance (Search robot), which will indicate its
position with an audible signal.
You can create a Timer for the cleaning
process, set the Suction mode, check the
condition of the brushes and filter and reset
them after cleaning or replacement and
Reset all brushes and filter.
IB_452854_SSRCA2_LB6_IE-NI-CY.indb 18 29.04.2024 07:38:16
To Next Page
Loading...
