■ 20 │ GB
│
IE
│
NI
│
CY
SSRA C2
Cleaning
DANGER!
► Pull the power adapter
4 out of the outlet
every time before cleaning. There is a risk of
electric shock!
ATTENTION!
► Do not use abrasive, aggressive or chemical
cleaning agents. They could damage the
outer surfaces of the appliance.
► To avoid irreparable damage to the appli-
ance, ensure that no moisture gets into it
during cleaning.
Note
► Switch off the appliance before cleaning it.
Appliance part Cleaning
schedules
Dust container
z
Weekly, emptying
after each cleaning
process
EPA filter
7
Weekly, 2x weekly
if very dirty
Side brushes
9
Every 2 weeks
Rotary brush
i
Weekly, 2x weekly
if very dirty
Sensors
p/f/k
Every 2 weeks
Charging contacts
3/s/h
Every 2 weeks
Wheels
o/d/y
Every 2 weeks
Cleaning the appliance
♦ Clean the appliance housing with a slightly
damp cloth. For stubborn dirt use a mild
detergent on the cloth.
♦ Use the cleaning brush 0 to remove hair
and dirt from the wheels o/d/y.
♦ Clean the sensors
p/f/k and charging
contacts
s/h on the underside of the
appliance and with a soft, dry cloth.
Cleaning the dust container and
filter
ATTENTION!
► Do not rinse the
EPA filter 7 with water. The
EPA filter 7 can be damaged as a result.
1) Press the release button t on the dust
container z, and pull it out of the appliance
(see Fig. 7).
Fig. 7
2) Press the release button t of the dust
container z, and fold it open (see Fig. 8).
Fig. 8
IB_452854_SSRCA2_LB6_IE-NI-CY.indb 20 29.04.2024 07:38:17
To Next Page
Loading...
