SYSTEM OPERATIONS-73
OIL X-CHANGE-R SYSTEM
(OPTIONAL) _________________
You may have chosen as an option
when you purchased your 34C, an OIL
X-CHANGE-R System, manufactured
by Ray Zager & Company and factory
installed at the Silverton plant. The pur-
pose of the OIL X-CHANGE-R System
is to automatically drain, fi ll and maintain
engine and/or transmission oil with relative
ease and no spilled oil, which is normally
associated with your required periodic oil
changes. The OIL X-CHANGE-R System
consists of an enclosed pump, located in
the engine compartment, which operates
on DC electrical power. The system pump
is controlled by a breaker switch, located
on the AC/DC Electrical Panel and de-
scribed as “Accessory” (Refer to the Elec-
trical Pages in this section of this Owner’s
Manual for the location of the switch for
the OIL X-CHANGE-R System). Opera-
tion of the system is accomplished by
turning ON the toggle switch located on
the pump unit.
Refer to the OIL X-Change-R System
Manual included with your owner’s
packet for information concerning the
operation and maintenance of this sys-
tem.
To Next Page
Loading...