EasyManua.ls Logo

Silverton 34C - Operation of the Air Conditioning;Heating System in Your 34 C

Default Icon
212 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYSTEM OPERATIONS-2
The desired zone temperature is manu-
ally set on the “Passport Control” and the
air conditioning unit is activated to supply
cooling or heating as required to constant-
ly maintain the temperature selected. The
photo below shows the control.
Each air conditioning unit will operate in
a “Dehumidi cation” mode upon de-
mand and is controlled by the “Passport
Control”. Refer to the Marine Systems
Operation and Maintenance Manual for a
complete description and instruction in the
operation of this mode.
Only certi ed and trained service techni-
cians should perform maintenance of
your Air Conditioning/Heating System.
Contact your Silverton dealer for general
maintenance and winterization of the sys-
tem on your 34C. Untrained persons may
carefully perform routine maintenance,
such as the cleaning of lters and the ex-
terior surfaces of the condensing coils.
REFER TO THE MARINE SYSTEMS OP-
ERATION AND MAINTENANCE MAN-
UAL FOR TECHNICAL INFORMATION
CONCERNING YOUR AIR CONDITION-
ING / HEATING SYSTEM.
Operation of the Air Conditioning/
Heating System in your 34C is as fol-
lows:
Turn ON the respective air condi-
tioner breaker switch, located on the
AC/DC Electrical Panel (See AC/DC
Electrical Pages in the System Op-
erations Section of this manual).
Make sure seawater intake is open
and seawater pump is operating prop-
erly.
Refer to the Marine Systems Opera-
tion and Maintenance Manual for a
detailed description of the function of
each button located on the “Passport
Control”.
Both Air Conditioning units create
condensation, which creates water that
has to be drained. The forward unit
drains into the shower sump pump.
Make sure shower sump circuit break-
er is turned on when operating the Air
Conditioning.
Turn ON the power button, located
on the respective air conditioning unit
“Passport Control”.
Press the fan speed button on the
“Passport Control” until the desired
speed is obtained.
Press the appropriate temperature
control button (Down/Up) to obtain the
desired temperature.

Table of Contents

Related product manuals