SIMARINE VIA - Wi-Fi Connectivity Configuration

DE
7. Device configuration
48
Device configuration
7.
7.4
WI-FI
This menu offers all the Wi-Fi settings for your VIA.
OPERATION - When set to ON, Wi-Fi module is enabled. Otherwise, it is disabled, and no configuration data is displayed.
MODE - The PICO supports AP mode which stands for the access point and STA mode for station mode.
7.4.1
AP Mode
When in AP mode, the VIA creates its wireless network. If you want to connect to it with your smartphone, please connect to
the network whose name corresponds to SSID setting value. Wireless network password can be changed with PASSWORD
setting.
Example: if your VIA’s serial number is 1234567890, then the default Wi-Fi SSID is sc567890 and the password is
sc123456.
7.4.2 STA Mode
When in STA mode, you can connect the VIA to your local router and connect with your smartphone via a router. This mode
enables more than one mobile app connecting to the VIA at the same time.
To set up STA mode take the following steps:
· Under MODE select STA mode.
· Under SSID find and select your router.
· VIA detects the security type, select password, and type in the WIFI password.
· After this select connect and wait for VIA to connect.