EasyManua.ls Logo

Simer BW85 Series - User Manual

Simer BW85 Series
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2011 SIM567 (12/7/2011)
OWNER’S MANUAL
12V DC Mini Vac Pump Kit
NOTICE D’UTILISATION
Trousse de pompe Mini Vac
fonctionnant sur le courant
continu de 12 volts
MANUAL DEL USUARIO
Juego de bomba Mini Vac
de12VCC
Series / Série BW85
3783 0411
293 Wright Street, Delavan, WI 53115
Phone: 1-800-468-7867
Fax: 1-800-390-5351
Web Site: simerpump.com
Installation/Operation/Parts
For further operating, installation, or
maintenance assistance:
Call 1-800-468-7867
English............Pages 2-8
Installation/Fonctionnement/Pièces
Pour plus de renseignements
concernant l’utilisation,
l’installation ou l’entretien,
Composer le 1 (800) 468-7867
Français..........Pages 9-15
Instalación/Operación/Piezas
Para mayor información sobre el
funcionamiento, instalación o
mantenimiento de la bomba:
Llame al 1-800-468-7867
Español ....... Paginas 16-22

Table of Contents

Questions and Answers

  • S
    Sandra GuzmanJul 28, 2025
    What to do if my Simer BW85 Water Pump runs but pumps little or no water?
    • D
      Donald Miller Jr.Jul 28, 2025
      If your Simer Water Pump runs but pumps little or no water, there might be a few reasons: * The impeller could be worn, in which case you should replace it. * The motor brushes might be bad, so you should replace them. * There could be a bad U-cup shaft seal (resulting in pump leaks), so you should replace the pump. * The suction or discharge hose might be kinked or coiled; if so, straighten out the hose.
  • S
    Stacey AliAug 4, 2025
    Why won't my Simer BW85 prime?
    • M
      Mary SampsonAug 4, 2025
      Your Simer Water Pump might not prime due to several reasons: * The suction hose may not be full; fill it. * The suction hose might be too long or too small; use a 1/2” suction hose, 6’ long or less. * The impeller could be worn; replace it. * There might be suction leaks; replace the hose washer and check for leaks in the hose. * The suction hose could be kinked or coiled; straighten it out.
  • J
    James RodriguezAug 13, 2025
    Why does my Simer BW85 Water Pump stop without warning?
    • M
      Maria HuberAug 13, 2025
      Your Simer Water Pump may stop without warning due to: * Overheating, which trips the thermal overload. Wait for the overload to reset; the pump will automatically restart. * A discharge hose that is too long or a discharge lift higher than 28’. Use a shorter hose or reduce the lift height.
  • S
    smithmichelleAug 20, 2025
    How to fix a Simer BW85 Water Pump that leaks?
    • P
      Patricia DoughertyAug 21, 2025
      If your Simer Water Pump is leaking, it could be due to: * A leaking shaft U-cup seal, in which case you should replace the pump. * A leaking cover O-ring; replace the cover O-ring.

Summary

12 V DC Mini Vac Pump Kit Owners Manual

Language Sections and Page References

Guide to English, French, and Spanish content sections with their respective page numbers.

Warranty Information

Limited Warranty Details

Details terms, conditions, and duration of the limited warranty for Simer products.

Warranty Exceptions and Periods

Lists specific products with different warranty periods than the standard twelve months.

General Warranty Terms and Limitations

Outlines general terms, conditions, remedies, and legal limitations of the warranty.

Safety Instructions and Information

Important Safety Instructions

Essential instructions to save and follow for installation, operation, and maintenance.

General Safety Information

General safety guidelines for using the 12V DC pump, including electrical and chemical hazards.

Pump Description and Specifications

Describes the pump's non-corrosive nature, reversible flow, and operational limits.

DC Motor Information

Information on DC motor requirements, voltage, and life expectancy.

Installation Guide

Pump Installation Steps

Step-by-step guide for installing the pump, including port removal and securing the unit.

Hose Connections and Priming

Instructions for connecting inlet and outlet hoses and priming the pump.

Hose Straightening Guidelines

Advice on keeping hoses straight to reduce friction and protect the pump.

Operation and Maintenance

Pump Operation Procedures

Instructions for wiring, power supply, and initial pump operation.

Routine Maintenance Tasks

Guidance on maintaining the pump, including impeller/cam ring replacement and brush inspection.

Maintenance Procedures

Impeller Replacement Procedure

Detailed steps for replacing the pump impeller and cam ring.

Fuse Replacement Procedure

Instructions on how to safely replace the fuse in the fuse holder.

Troubleshooting Guide

Pump Stops Unexpectedly Troubleshooting

Diagnosing and resolving issues when the pump stops without prior warning.

Pump Priming Issues Troubleshooting

Troubleshooting steps for when the pump fails to prime or prime correctly.

Pump Leak Troubleshooting

Identifying and fixing causes of leaks in the pump or its connections.

Low Water Output Troubleshooting

Resolving problems where the pump runs but delivers little or no water.

Repair Parts List

Parts Identification and Part Numbers

List of all repair parts with their reference numbers, descriptions, and part numbers.

Simer BW85 Series Specifications

General IconGeneral
BrandSimer
ModelBW85 Series
CategoryWater Pump
LanguageEnglish

Related product manuals