5.5. PHONEBOOK MENU
From the main channel screen, press the ‘M’ key to enter Menu Mode. Use the ▼ /▲
keys to scroll through menu options. With the PhoneBook menu option displayed,
press the OK key to access the PhoneBook screen.
From the phoneBook screen, it is possible to view all of the phone entries in the
phonebook. These entries may be Individual Addresses, Telephone numbers or Talk
Groups.
When the PhoneBook screen is displayed, it will show the currently selected
phonebook entry.
The second line shows the name of the selected entry.
The third line shows the unit identifier of the selected entry. This is the P25 ID that the
radio will call.
The fourth line shows the IP address associated with the phonebook entry. IP
addresses are used for data calls and text messages.
Use the ▼ /▲ keys to scroll through and select the relevant phonebook entry.
To return to the Menu screen, press either the Back or ‘M’ keys.
A function key (when configured for Reset, or any other key configured for Reset) will
exit back to the default channel screen.
5.5.1. Making an Individual Call
In PhoneBook mode, when the PTT key is pressed:
• The radio is changed to individual call mode (individual call to the unit identifier
of the selected Phonebook entry). The individual call icon is displayed.
• If the radio is already in individual call mode addressed to a different unit, the
destination unit ID is replaced by that of the newly selected Phonebook entry.
• The radio will remain in individual call mode until the inactivity timeout has
elapsed, i.e. No PTT or signal received for a set time period (typically 10 seconds).
The inactivity timeout period is set with the FPP.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 35
To Next Page
Loading...
Need help?
General
