The System ID entry can then be changed using the numeric digits and ▼ key as a
destructive backspace.
If the System ID has to be changed, use the keypad and the ▼ key to enter the new
System ID as required and then press the OK key.
If the system ID does not have to be changed, press the OK key.
The ‘Edit WACN ID’ sub-menu screen will be displayed.
5.6.3.2. WACN ID
Upon entering the Edit WACN ID screen, the current Wide Area Coverage Network
(WACN) ID of the selected phonebook entry is displayed.
The WACN ID entry can then be changed using the numeric digits and ▼ key as a
destructive backspace.
If the WACN ID has to be changed, use the keypad and the ▼ key to enter the new
WACN ID as required and then press the OK key.
If the WACN ID does not have to be changed, press the OK key.
The ‘Edit Unit ID’ sub-menu screen will be displayed.
5.6.3.3. Unit ID
Upon entering the Edit Unit ID screen, the current Unit ID of the selected phonebook
entry is displayed.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 39
To Next Page
Loading...
Need help?
General
