5.16.2.3. Messages Reply – Pop-Up Menu
The Messages Reply pop-up menu selections are:
• CALL – to call the selected sender.
• SMSG – to send a short message to the sender.
• TXTMSG – to edit and send a text message to the sender.
Use the ▼ /▲ keys to select the required option.
With the ‘CALL’ option selected, press the OK key. The radio will return to the default
screen and be set to individual calling mode for a time out period determined by radio
configuration. When the radio’s PTT is activated, an individual voice call is sent to the
message sender.
With the ‘SMSG’ option selected, press the OK key to display the short message
MessagesReply screen.
With the ‘TXTMSG’ option selected, press the OK key to display the message Reply Text
screen.
Press the ‘M’ or Back key to return to the next highest menu screen.
Press the ‘Reset’ function key (if configured) to return to the default screen.
5.16.2.4. Short Message Reply Screen
The MessagesReply menu is used to reply to a received message with a pre-defined
short message.
When the screen is displayed, it shows the destination unit identifier and a short
message.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 54
To Next Page
Loading...
Need help?
General
