EQUIPMENT SAFETY
INSTALLATION AND MAINTENANCE
The SDB600 Series Base Stations should only be installed and maintained by qualified
personnel.
CAUTIONS
CAUTION
Before drilling any walls, first check for any buried cables or pipes.
CAUTION EQUIPMENT DAMAGE.
When the SDB680 Base Station is installed into a rack, DO NOT use the
front panel attachment points to support the full weight of the
equipment or damage to the equipment may result. Suitable shelves or
supports MUST be provided to support the body of the base station
along the length of each side.
MAINTENANCE PRECAUTIONS
CAUTION
Electrostatic Discharge Sensitive Devices (ESDS Devices). This equipment
contains ESDS Devices, the handling procedures detailed in BS EN
61340-5-1:2007 or ANSI/ESD S20.20-1999 are to be observed.
Doc Number: TNM-I-E-0046 ISSUE 1.2 Page 14
To Next Page
Loading...
Need help?
General
