PREFACE
Before installation, commissioning or operation, this document should
be read in full. In addition, user should also read the Simoco Digital
Management Terminal (SDMT) User Manual [2], as the SDMT software
application is used extensively in the configuration procedures con-
tained within this installation guide.
DECLARATION
This Installation Guide covers the SDB680 50W Base Station for installation in Wall
Mount and Rack Mount variants.
Any performance figures quoted are subject to normal manufacturing and service
tolerances. The right is reserved to alter the equipment described in this manual in the
light of future technical development.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
COPYRIGHT
All information contained in this document is the property of Simoco. All rights are
reserved. This document may not, in whole or in part, be copied, photocopied,
reproduced, translated, stored, or reduced to any electronic medium or machine-
readable form, without prior written permission from Simoco.
COMPUTER SOFTWARE COPYRIGHTS
The AMBE+2TM voice coding Technology embodied in this product is protected by
intellectual property rights including patent rights, copyrights and trade secrets of
Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use
within this Communications Equipment. The user of this Technology is explicitly
prohibited from attempting to extract, remove, decompile, reverse engineer, or
disassemble the Object Code, or in any other way convert the Object Code into a
human-readable form. U.S. Patent Nos. #6,912,495 B2, #6,199,037 B1, #5,870,405,
#5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.
DISCLAIMER
There are no warranties extended or granted by this document. Simoco accepts no
responsibility for damage arising from use of the information contained in the
document or of the equipment and software it describes. It is the responsibility of the
Doc Number: TNM-I-E-0046 ISSUE 1.2 Page 3
To Next Page
Loading...
Need help?
General
